Removal System Product List and Ranking from 20 Manufacturers, Suppliers and Companies | IPROS GMS

TMR moisture removal system

TMR moisture removal system

The TMR moisture removal system is a product designed to remove moisture and contaminants from lubricating oil and hydraulic fluid tanks. Moisture, contaminant particles, and metal ion contaminants can enter the oil tank in various ways. The TMR moisture removal system prevents the entry of moisture and contaminants by continuously supplying dry air into the headspace of the tank. The dry air that enters the tank absorbs moisture and exits through the vent. By constantly introducing dry air, it prevents metal components released into the atmosphere from seawater, industry, and agriculture from entering the oil tank. The required amount of air is very small, so the tank will not be pressurized. It cannot be used if the tank is under negative pressure or if a ventilation fan is installed, so please stop the operation of those devices. The TMR moisture removal system is a very user-friendly product made of high-performance hollow fiber membranes and an aluminum casing.

Dust removal system

If you are troubled by dust generated during crushing and grinding, this is a must-see!

Generate a mist of ultrafine particles from the nozzle and efficiently adsorb dust particles below 10 microns.

Fluorine-based cleaning system Particle removal system

It has minimal impact on resin materials, excellent quick-drying effects, and the device itself is space-saving.

We would like to introduce the "Fluorine-based Cleaning System Particle Removal System" handled by Shin Ootsuka. This product utilizes fluorine-based solvents, taking advantage of low surface tension and permeability to thoroughly penetrate the product and remove particles. It has minimal impact on resin materials, excellent quick-drying effects, and the equipment itself is space-saving. It can also be used for drying applications after alcohol (IPA, ethanol). 【Features】 <Compact F Series (Type F-110)> ■ Suitable for prototype testing and laboratory use ■ Compatible with various fluorine-based solvents ■ Compact design (portable) ■ Capable of ultrasonic cleaning and steam cleaning ■ Liquid recycling (distillation regeneration) is possible *For more details, please refer to the related link page or feel free to contact us.

Static electricity removal system

High-speed static electricity removal (under 0.2 seconds) and wide-area static electricity removal system (up to 6m).

The prices for the Exea Corporation's static electricity removal systems are as follows. Please contact us for details on each model, accessories, etc. 1) Ultra Long Super Ion Air Knife: From 380,000 2) Super Ion Air Knife: From 65,000 3) Standard Ion Air Knife: From 53,000 4) Super Ion Air Wiper: From 165,000 5) Ion Air Cannon: From 105,000 6) Ion Air Gun: From 80,000 7) Ion Air Jet: From 65,000 8) Ionization Bar: From 26,000 9) Ionizing Point: From 33,000 10) Digital Static Electricity Meter: 140,000 11) Ion Checker / AC Sensor: 9,900

Static electricity removal system

High-speed static electricity removal system (under 0.2 seconds) and wide-area static electricity removal (up to 6m).

**Overview** The combination of energy-saving high-efficiency airflow products and ionizers achieves high-speed static electricity removal in under 0.2 seconds and wide-area static electricity removal up to 6 meters away. The energy-saving high-thrust airflow instantly removes dirt and charged fine particles attracted to the workpiece.

Inorganic glass scale and rain stain removal system "Amejimi Buff Min"

Easily, powerfully, and quickly remove stubborn rain stains and scale dirt stuck to glass with a combination of a special buff and compound!

"Rain Stain Buff Min" is a polishing system designed to safely remove stubborn rain stains and water spots that adhere to glass. By using the special rubber urethane buff "Rain Stain Buff Min" along with the "Rain Stain Buff Min Dedicated Compound," you can effectively remove even the most stubborn water spots simply by performing polishing work with a single polisher. 【Features】 ■ Since the polishing work is done with a polisher, it is less likely to harm the health of the operator. ■ Enables speedy removal of rain stains. ■ Recommended for use with a single polisher (while it can also be used with gear action polishers and dual action polishers, there tends to be a decrease in work speed). *For more details, please refer to the PDF document or feel free to contact us.

Air-blowing static electricity removal unit 'WINSTAT BF-2MA'

New product! Compact air ionizer that demonstrates stable static elimination performance over a long period.

The "WINSTAT BF-2MA" is a slim, lightweight low-frequency AC air ionizer. Compared to conventional high-frequency AC types, it has less change over time, a longer maintenance period, and is easy to maintain. The discharge needles are less prone to dirt, providing stable static elimination performance over a long period. It reduces the amount of ozone generated compared to conventional high-frequency AC types. 【Features】 ■ High reliability ■ High maintainability ■ Enhanced safety features ■ Reduced ozone generation ■ Selection of static elimination areas with two types of louvers *For more details, please refer to the catalog or feel free to contact us.

Scale Removal System "Type SRS-E4500"

It is a revolutionary recycling device that combines oil-water separation, filtration, and automatic concentration adjustment.

The scale removal system "Type SRS-E4500" combines the SRS tower, which accelerates the precipitation of CaCO3 (calcium carbonate) using electrolysis, and the E4500 tower, which removes fine particle scale using electrocoagulation filtration. It achieves scale adhesion prevention and removal in cooling towers and cooling water circulation piping systems of large air conditioning systems without chemicals. 【Features】 ○ No chemicals used ○ Maintenance approximately every six months ○ Optimal for factories with strict regulations on total drainage volume due to extremely low drain water ○ Prevents scale adhesion in the cooling water circulation path For more details, please contact us or download the catalog.

Static Electricity Removal Unit Ionizer 'DTY-ELG31' / Koganei

Deionization and dust removal are possible in narrow spaces! The high-brightness LED reduces the chances of overlooking small foreign objects!

The "Ionizer DTY-ELG31" is an air gun-type static electricity removal unit equipped with standard lighting LEDs. The "DTY-ELG31" with an IN port specification is lightweight at 140g and has a shape that fits comfortably in the hand. Additionally, the "DTY-ELG31-PAU" features a built-in pulse blow unit, which enhances energy efficiency and dust removal efficiency through pulse air. Thanks to the high-frequency AC method, it offers a high static elimination effect and maintains a good ion balance. It uses a highly flexible, bend-resistant cable (only for the main unit cable). 【Features】 ■ Standard equipped with lighting LEDs ■ High-voltage power supply and air valve built into the main unit ■ No separate controller required ■ Reduces compressed air consumption, contributing to energy savings in factories ■ IN port and pulse blow unit: detachable *For more details, please refer to the PDF document or feel free to contact us.

Environmental business, space business

We are working on the development of a debris removal system utilizing knotless mesh technology.

Debris in orbit (space junk) poses not only the risk of colliding with and destroying operational satellites, but also the danger of scattering numerous small debris through collisions among debris themselves. There is a need for urgent measures to prevent the number of debris generated by collisions from increasing exponentially, making space unsafe and unusable. The "debris removal system" that eliminates used or malfunctioning satellites and rockets is a means to fundamentally solve the debris problem. Nitto Seimo is leveraging its knotless net technology and is working with JAXA to develop a debris removal system aimed at practical application. 【Features】 - Removal of used or malfunctioning satellites and rockets - Fundamental solution to the debris problem - Utilization of knotless net technology - Joint development of the debris removal system with JAXA For more details, please contact us or download the catalog.

Dissolved oxygen removal system (deoxygenation device, stripping mixer)

It is a high-efficiency dissolved oxygen removal system using nitrogen gas! There are examples where the removal efficiency has increased by more than four times compared to the conventional bubbling method! It has a super compact piping structure.

Dissolved oxygen exists in liquids. Generally, about 7 to 10 ppm of oxygen is dissolved in the liquid. By removing this dissolved oxygen, it is possible to suppress deterioration due to oxidation of the product and maintain or improve quality. In the industrial sector, reducing dissolved oxygen can lead to improved quality of the final product and increased production efficiency. For food applications, there is a "sanitary specification," while for industrial applications, there are "flange specifications" and "explosion-proof specifications." The installation location can be indoors or outdoors, and it can also be used in hazardous areas where explosion-proof specifications are required. Additionally, since continuous processing is possible, large volumes of liquid can be reliably processed.

Coating Pre-treatment Equipment - Iron Powder Removal System -

Automatically expels foreign objects as needed! No maintenance required and no consumables needed.

Our "Iron Powder Removal System" removes debris and contaminants that can compromise paint quality, such as welding spatter. The flood spray enhances the removal of foreign substances from the body, proving to be even more effective than removing foreign substances from the liquid, resulting in a significant reduction of contaminants. The cyclone separates and collects iron powder from the liquid through centrifugal separation. 【Features】 ■ Flood Spray ■ Cyclone ■ Iron Powder Removal System using magnets *For more details, please refer to the related links or feel free to contact us.

局所排気型 ホルムアルデヒド除去ユニット『HORUQシリーズ』

揮発したホルムアルデヒドを局所的に吸引除去！コンパクト設計で、持ち運びが容易です

『HORUQシリーズ』は、局所排気型 ホルムアルデヒド除去ユニットです。 コンパクト設計で、持ち運びが容易。処理風量は最大2.5m3/minです。 吸着剤ギガコールF内蔵で、揮発したホルムアルデヒドを局所的に吸引 除去します。 【仕様】 ■型式：HQ-14GF ■処理風量［m3/min］：最大2.5 ■吸込風速［m/sec］：最大3.5 ■寸法［mm］：H545×W420×L360 ■重量［kgf］：40 ■電源：単相100V 50/60Hz ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。

Mold Removal System "BANsystem"

Reduce building deterioration due to mold and dirt damage and lower renovation costs!

The "BANsystem" is a mold removal system that helps reduce building renovations due to mold and dirt damage, creating a hygienic space. By applying a specialized liquid agent, it can decompose and remove dirt without scrubbing, minimizing damage to materials and prolonging the renovation cycle. This results in a finish with minimal unevenness as it breaks down the dirt itself. Additionally, by continuously spraying our company's sterilizing and deodorizing "Sera Water," it is possible to reduce the occurrence of mold. 【Features】 ■ Decomposes and removes mold spores (not just cleans) ■ Decomposes mold without scrubbing surfaces like boards ■ Restores as close to the original form as possible ■ Conducts formulation and reaction checks of the chemical solution against local mold *For more details, please download the PDF or feel free to contact us.

Exhaust gas high concentration mist removal system CMS

Exhaust Gas High Concentration Mist Removal System CMS

Achieving an incredibly simple, low-cost, and freely designed solution! ○ Removal of odor and white smoke caused by fine dust contained in exhaust gases ○ Removal of exhaust gases from high-temperature furnaces and misgenerated emissions during the production process ○ Removal of corrosive mist and particles (0.1 microns) Submicron particles can also be removed through generalization with electrostatic precipitators ○ Customizable from small volumes (50 cubic meters/min) to large volumes (300 cubic meters/min)

Drainage dioxins and heavy metals removal system

By using the DHSR system, high concentrations of dioxins can be reduced to below environmental standards.

Each coagulant exhibits high removal performance and coagulation performance, allowing the treated water to meet the water quality environmental standards of the Dioxin Special Measures Law and the wastewater environmental standards related to harmful substances (seven heavy metal items). The treated water becomes remarkably clear.

Dioxin removal Fe-DS system

We can remove dioxins from the leachate of final disposal sites that exceed environmental standards and bring it below discharge standards.

The leachate from the final disposal site contains a high amount of unburned carbon derived from organic matter and incineration ash, and often does not lose color even after the addition of coagulants. In such cases, the concentration of dioxins often does not decrease significantly. As a countermeasure, the Fe-DS system is effective. By using a combination of ferrous iron, caustic soda, and Ultra-Separate S-DS for coagulation, very clear treated water can be obtained. This treated water has a neutral pH and can meet the environmental standards for dioxins, including the river discharge standards. In examples of dioxin wastewater treatment, the concentration of dioxins can be reduced from 30 pg-TEQ/L to below 1 pg-TEQ/L after treatment.

Ion air gun / static electricity removal system

Instantly cut stubborn dust and static electricity at the manufacturing site.

The handheld ion air gun generates more than ten times the ions compared to conventional products due to its powerful ion generation mechanism. As a result, the static elimination speed is reduced to one-tenth, achieving faster manufacturing line speeds and improved yield. Additionally, with its powerful air blow, it can remove dust and static from a distance of 4.6 meters. It can also instantly remove cutting chips generated during plastic processing, which was previously difficult.

Super Ion Air Knife / Static Electricity Removal System

For dust removal before vehicle body painting!

The Super Ion Air Knife combines a powerful air blow with 40 times amplification and an ion generation mechanism with more than 10 times efficiency, creating a system that simultaneously removes static electricity and dust. The high-performance ion generation function achieves a static elimination speed of 0.2 seconds (one-tenth of conventional products). The illustration on the left shows a gate system for removing charged dust in the pre-painting process of vehicle bodies, using six Super Ion Air Knives. It reduces painting defects caused by dust.

Cyclic foreign object removal system

Pass through the repeated magnetic separator! Effective when removal cannot be completed in one pass.

We would like to introduce our "Circulating Foreign Matter Removal System." By using vacuum conveyors and other equipment, it allows for repeated passage through a magnetic separator, which is effective when a single pass is insufficient for removal. We can propose solutions tailored to your needs, such as circulation time and valve switching methods after circulation. Please feel free to contact us when you need assistance. 【Features】 ■ Capable of repeated passage through a magnetic separator ■ Effective when a single pass is insufficient for removal *For more details, please refer to the PDF document or feel free to contact us.

Static Electricity Removal Unit Ionizer 'DTY-ELG41' / Koganei

Standard equipped with LED lighting! Reduces compressed air consumption and contributes to energy savings in factories.

The "Ionizer DTY-ELG41" is an air gun type static electricity removal unit that can create a suitable dust removal environment for the target work. The main body can be bent to change between air gun shape and straight shape. With the extended nozzle, it can remove static electricity and dust in narrow areas. Additionally, it is equipped with a high-voltage power supply and air valve, so a separate controller is not necessary. The "DTY-ELG41-PAU" can enhance energy efficiency and dust removal effectiveness through pulse air. 【Features】 - Fits comfortably in the hand and is lightweight at 185g (DTY-ELG41 IN port specification) - High static removal effect due to high-frequency AC method, with good ion balance - Uses a bend-resistant cable (only for the main body cable) - IN port and pulse blow unit: detachable - High-brightness LED reduces the chance of overlooking small foreign objects and allows for checking foreign objects on surfaces like the bottom of holes *For more details, please refer to the PDF document or feel free to contact us.

Information about the "Water Quality Purification System by P-Catch" from Createra Co., Ltd.

Two types of removal systems are available according to your needs!

The "P-Catch Water Quality Purification System" is a system for water quality purification that uses the high-performance absorbent material "P-Catch." We offer a "closed-type removal system" that efficiently removes total phosphorus and soluble phosphorus, and an "open-type phosphorus removal system" that efficiently removes phosphorus from secondary treated wastewater. You can choose according to your application. 【Features】 ■ Simple equipment ■ Existing equipment can also be utilized ■ High efficiency (closed type) ■ Low cost (open type) ■ Easy to scale up (open type) *For more details, please refer to the catalog or feel free to contact us.

Is there a cooling tower that has moss and algae growing on it?

That appearance! The Marceco system solves it! No need for cleaning by contractors! Just add chlorine and the cooling tower will be clean?!

Mong Steel will provide the service, and the Marceco system does not require hiring a contractor for cleaning. By simply floating the Marceco balls and chlorine supply device, it lifts and removes stubborn moss and algae. Benefits: 1. Once installed, you basically just need to add chlorine! 2. The lifted moss falls off under its own weight! 3. Low running costs! (Hiring a contractor a few times a year can be quite expensive...) 4. You can try it out with a rental! 5. The sales team and manufacturer are very responsive! 6. You can continue using your existing chlorine! Drawbacks: 1. High initial cost (please try it out with a rental!) 2. Dirt may accumulate on the main unit (we will clean it once a year) 3. The main unit is somewhat large (Of course, we will prepare a size that fits your cooling tower) If you are even slightly interested, please contact us at the information below! Mong Steel Co., Ltd. Special Products Department, Special Products Sales Section, Akihiko Ito TEL: 090-9352-5773 FAX: 0561-34-1275

Superheated steam system for the removal of adhered and contained organic substances in metal waste.

Waste containing plastic and high-calorie waste, which are difficult to process with conventional pre-treatment (incineration), can be safely processed using a superheated steam system. ■ Equipment Features - Safe processing without ignition: Compared to conventional direct combustion methods, the fire risk is significantly reduced, enabling safe and stable operations. - Improved dissolution yield due to high-quality and oxidation suppression effects: Thermal decomposition treatment with the superheated steam system provides high-quality cleaning and degreasing effects. Additionally, oxidation suppression effects can be expected to improve the yield during dissolution. - Energy-saving effects through heat recycling system: Effectively utilizes the thermal energy contained in organic matter, replacing the combustion and steam generation energy of the heat booster.

Satomi Manufacturing Co., P.C.R. System

The definitive version of the continuous foreign object removal system from the pulper!!

The pulper does not stop for cleaning, so there is no line stoppage or fluctuations in concentration. Since there is no accumulation of foreign substances inside the pulper, it can maximize its processing capacity. Being fully automated, it does not impose a burden on the operators. Even if the extraction plate of the pulper is made finer, its capacity can be maintained, significantly improving the extraction effect and greatly contributing to product productivity.